I’ve used mostly Cone 6 clays from Pottery Supply House:

The ones I’ve used the most are:

CONE 06 WHITE GROGGED CLAY: The Review: The grog allows you to work soft or rigid with ease. This is a beginners dream clay to use.

CONE 06 RED GROGGED CLAY: The Review: This is the least favorite to use. It fires off the red and needs specialized glazes.

WHITE GROGGED STONEWARE:The Review: Excellent clay for larger structural pieces. It can dry to leather hard slowly enough to work over a few days and is rigid enough for the most architectural structure.

SHEBA RAKU CLAY: The Review: In its raw state, it is an ugly finish. It changes the chemical reaction and thus the colors of the glazes used on it. It has a finer grog in it and is a great clay for beginner hand-builders. Oddly, it loves Pete Pinel’s green glaze. Also works beautifully with matte glazes.

CONE 6 PORCELAIN: The Review: This was a challenge to use. One needed to work it faster because if it dried too fast, it would crack. It’s elasticity while in the wet-leather hard stage was fun to play with and allowed to melting appearances. It took stains very well and loved my pure pigment glazes.

BLACK CONE 6 CLAY: The Review: This worked like a tinted porcelain. It didn’t hold glazes or stains in the way I expected and seemed to give the best results when left un-modified by glaze or stain. It held up well to being mixed with gorged clays. The shrinkage was minimal, compared to white porcelain.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.