Secret Memory Box #3 – Memories to Put Away

Slab built; starting with very wet and thin slabs, that slump into organic shapes; often done with leftover scraps of slabs from larger works, attached with a little slip; left to dry to leather-hard then the whole surface was rubbed with a damp sponge to smooth out seams and lift some of the grog to … Continue reading Secret Memory Box #3 – Memories to Put Away

Secret Memory Box #2 – The Box Project – Oubliette

Started with a ball of wet terracotta; three small balls were made at the same time for the feet; left to dry slowly under loose plastic until leather-hard; the top was cut straight off and the inside was hollowed both top and bottom; a lip was fashioned with the carve-out clay to hold the lid … Continue reading Secret Memory Box #2 – The Box Project – Oubliette

Secret Memory Box #1 – The Box Project – Glazed

It started with a pinch-pot; the bottom was tapped into a foot shape then scored for texture; when leather-hard, the lid was carved out and the handle attached and textured; after a little more drying, it was burnished; dried to bone dry and bisqued; the lid was stained with iron oxide, the sides doted with … Continue reading Secret Memory Box #1 – The Box Project – Glazed

Come get your hands dirty and have some fun at The Dorval Potters Guild!

Hello Pottery Enthusiasts! The Winter Semester of classes is just around the corner! Come get your hand dirty and have some fun at The Dorval Potters Guild! Registration for winter pottery classes will be taking place on Wednesday December 18th, from 6:30pm to 8pm, in our studio (room S014A) located in the basement of the Sarto … Continue reading Come get your hands dirty and have some fun at The Dorval Potters Guild!

Waterfall

Terracotta clay, slab-hand-built, carved, folded, and taped. Bisqued without any stains or engobes. Then I used a variation of oxides and celadon glazes. I had hoped they would drip down and they did. The carved base only had some thin coats of iron oxide stains, but that also changed in the firing. I'm pretty sure … Continue reading Waterfall

Striations “SOLD”

The intention was to give the feel of something that may have formed naturally following the eruption of a volcano. For this, I used very unusual materials to colour the inner and outer surface. This one of those pieces that no school would allow me to make in their classes. Thank goodness I had the … Continue reading Striations “SOLD”

Coiled Bowl

Sometimes the simplest techniques can reveal amazing results... but only when we let go and stop overthinking it. This is stoneware clay, coiled (not my favourite technique), then pressed into a slump mould bowl. I love rustic work, so I left it as crude as I could. It dried slowly over a week or two, … Continue reading Coiled Bowl

Into The Fold

I used a terracotta clay body and wanted to see just how thin I could go. I managed to get it down to about 2mm thick. I had to time it just right, as working it too wet would leave me with tears in the clay, and it wouldn't hold up on its own. Too … Continue reading Into The Fold

Chrysalis Teapot

This started with soft scraps of clay and transformed into a teapot. My amazing daughter was with me in the studio and she added the butterflies. The glaze was a Cone 6 creme that didn't like the stoneware clay body very much. it was painted on, instead of being dipped. I also painted a manganese … Continue reading Chrysalis Teapot

Abstract Ship

Again using scraps of slabs and joining them together into whatever shape they decide. This was done while I was seeing the smokestacks of ships in my imagination. I decided to experiment with a red engobe of my own mixture. It would have been more vibrantly red, had I fired it at Cone 04, instead … Continue reading Abstract Ship